Clor-D-Tect Q4000 (Q4-000-SG)

Clor-D-Tect Q4000 (Q4-000-SG)
Analytes Chlorine, Chlorinated Organics
Matrix Used Oil, Solvents, Organic Liquids
Detection Method Quantitative colorimetric titration
Action Levels 200 - 4000 ppm
MDL 200 ppm
MQL 600 ppm
Interferences Sulfur may cause false positive results
Overall Accuracy 10% +/- MDL
Analysis Time 5 minutes
Catalog Number Q4-000
Packaging 20 Kits to a shelf pack, 80 kits per case. Minimum order 10 kits. Orders greater than 10 kits must be in multiples of 20.

Field test kit for quantifying total chlorine (halogens) in used oil

WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov

NOTE: This product contains mercury, dispose of kits according to local, state or federal laws.

On-Site Test Kit for Quantifying Total Chlorine (halogens) in Used Oil (waste oil)


U.S. EPA SW-846 Method 9077
ASTM Method D-5384

Clor-D-Tect Q4000, under USEPA SW-846 Method 9077, is used to determine quantitative chlorine levels in used oil. The kit determines the chlorine level of used oil over the range of 200 ppm to 4000 ppm. The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level. Clor-D-Tect Q4000 is a proven test to measure chlorine in crankcase, hydraulic, diesel, lubricating oils and virtually any hydrocarbon based solvent.

The pocket-sized Clor-D-Tect Q4000 kit has all its premeasured reagents sealed in glass ampules for safe, consistent, and accurate results. The test is quick and easy to run, with results obtained in the field in less than 5 minutes with no special training.

Technical Hint Videos

Related Papers (PDF Downloads)

Manuals:
  • Clor-D-Tect Q4000 Instructions - July 13, 2006 || Download
MSDS:
  • Clor-D-Tect Q4000 - July 23, 2015 || Download
FAQs:
  • No FAQs available
Technical Papers:
  • Test Methods for Chlorinated Compounds in Used Oil (DTR-13-05) - September 1, 1993 || Download
  • Regulations and Mgmt. Procedures for Waste Oil Disposal (DTR-09-01) - June 7, 1989 || Download
  • A Rapid Method for the Quantitative Determination of Halogens (DTR-08-01) - July 13, 1988 || Download
  • Evaluation of Techniques for Determining Chlorine in Used Oils (DTR-07-02) - August 1, 1987 || Download

ProductSearch

View All Products